ok , i have a Maximum ST and it runs like it is lean but is really rich . i found out that there is NOT a lot of gas getting throught the fuel line to the engine . there are air bubbles in the line after i gas it up hard and bring it back . i changed the fuel tubing to silicone stuff and cleared the back pressure tubing , but still bubles and fuel is only half way up the line somtimes . i did just take off the carb , is it because ur supposed to seal it before u put it back on ? and should u tighten the carb screws hard ? any replies would be appreciated

------------------
:!**sHªñä!º8**!:
[__]---[| || |]---<{[[[]-

Check the carbs O ring seal . If it is cut or missing you will have an air leak . Other things to check are the fuel lines at the connections for any pin holes , The exhaust ****** for blockage , The filler caps O ring for cuts , nicks etc . Check the carb screws , if one / both are loose , striped another air leak . Next check carb settings . Both high and low neddles .

" Got gas ", I like your name .

geez gotgas u really covered it . BTW u did the same thing i did with the word
" ni pple ". LOL it blanks it out !
if i do have a leak how do u seal it ? my manual says not to use silicone sealant or somthing .

------------------
:!**sHªñä!º8**!:
[__]---[| || |]---<{[[[]-

I had the same problem with my Max ST . And I ended up sending it back for many reasons to be repaired . Find out more on my web site at http :// www . fortunecity . com / athena / jewelry / 1087 / index . htm

------------------
I have a Max ST , xxt " cr ", RC10 , MT10M and I love them all !!! CHECK OUT MY WEB SITE FOR MORE .

http :// jonathan210 . nav . to Her try this one mabey this will work right .

------------------
I have a Max ST , xxt " cr ", RC10 , MT10M and I love them all !!! CHECK OUT MY WEB SITE FOR MORE .

The thing still dont work and it spaces out the words so you cant copy and paste . A little help ???

------------------
I have a Max ST , xxt " cr ", RC10 , MT10M and I love them all !!! CHECK OUT MY WEB SITE FOR MORE .