[mikevillena]

pockets".....
It might be high time to let the manufacturers know...."t'was the winter of our discontent..." Make your 30 bucks count. I'll start off (I hope I don't get tossed off this forum!)
1/10th scale:

Datsun 510
Porsche 550
Porsche 935/78 "Moby Dick"
Porsche 356 FHC (and DHC for kitty)
Porsche 914/6/8
Porsche 944 or 928
Meyers Manx (dune buggy)
Ferrari 365 GTB Daytona (not the fake Miami Vice GTS poser..it was a 'vette in drag)
Ferrari 250 GTO (Gran Turismo Omologazione) or SWB...I know Kyosho did one, but it was in some oddball 1/9th or 1/8.5th scale
Ferrari 250 Testa Rossa (pontoon fenders of course)
Ferrari 250 GT Berlinetta Lusso
any Ferrari other than that butt ugly "Enzo" (who's namesake is probably rolling in his grave)
1940 Ford Pick-up Truck
UOP Shadow Can-Am ( it's very low so it'll have to mount on a Tamiya F-1 chassis)
Facel Vega
Lotus Elan
Lotus Super Seven
Lotus Elite
Lotus Eclat

Okay, it's somebody else's turn.

PS. To Admin or to any of the Mods...I seriuosly think this thread could be useful feedback to HPI, Tamiya, etc. Please delete, sticky or re-write as you see fit. Thanks

[orbitron]

Nissan 280z widebody
and most definitely a Porsche 914

[Jayweezy]

Dodge SRT-4
Honda Civic Si Hatch
Pontiac GTO (Drift)
Buick GNX
Plymouth Satellite

[LEADFOOT]

how can you list a GNX and Satellite in the same post as a Neon or Civic?


....that's blasphemy!

[FESTER2004]

yeah a dodge neon, van bodies, a quad/atv body(change your whoe, ride into a different veichle(kyosho had a electric n gas r/c atv years ago),chrysler sebring(both convertable n hardtop)mazda tribute suv.lexus rx300 suv body.kia sportage,u get my hint...great idea mike for startn this n hopefully the big shots get ideas by our feedback!

[harley1874666]

i want a ups delivery truck body.

[Nutter]

Personally, I prefer more "sci-fi" (perhaps "heavily stylized" is a better term?) than realistic bodies - the Illuzion series from J Concepts is a perfect example of this. WED: Keep it up. Once I get through the unpainted bodies I already have (there's a lot of 'em ), a few Illuzion bodies will be next on the shopping list.

[HRDforever]

I want the UPS Truck also, that be cool!
I also want it to come to my house!

[mikevillena]

Hey Harley and HRD,
Good call on the UPS truck. How about they include a Dale Jarret driver figure?
"What can Brown do for you?"

[MrB1973]

Originally Posted by FESTER2004

yeah a dodge neon, van bodies, a quad/atv body(change your whoe, ride into a different veichle(kyosho had a electric n gas r/c atv years ago),chrysler sebring(both convertable n hardtop)mazda tribute suv.lexus rx300 suv body.kia sportage,u get my hint...great idea mike for startn this n hopefully the big shots get ideas by our feedback!

As for the atv/quads...check this out:

http://forums.radiocontrolzone.com/s...d.php?t=197113

[Piggy89373]

hmmm...for 1/10th, a Vega, Gremlin, and a Nissan R390 body that will fit an NTC without modifications.

[mook]

Any of the ford cosworth family, like the RS500

[AirBoston]

Lotus Super 7
Lotus 11
Original Lotus Esprit Turbo
Porsche 930
Porsche 928
of course Porsche 914/6GT from 1970 Lemans
Porsche 944
Porsche 356 PreA Speedster
Porsche 356C Coupe
Ferrari 365GTB4 coupe and Spyder
Ferrari 250 GTO
Ferrari 250 SWB
!!!LAMBORGHINI MIURA!!!
Jaguar Series 2 Saloon
Jaguar Series 1 XKE

[microrcdude]

-90-94 Talon/Eclipse/laser
-Any Fiat
-Eunos Roadster(one to fit 190 and 200MM TC's, not minis)
-Widebody RX-7 (SCCA EP Style)
-All cars found in trans-am Series
-2006 MX-5

[twood]

89 mustang 5.0
early 90s nascar lumina
95 impala ss
34 ford roadster
57 chevy
69 vette stingray
dodge ram srt 10
06 charger
66 chevelle ss

[twood]

weinermobile in 1/10 scale

[RealJDMman]

I heartly second the porsche 944

nissan 300zx
ferrari 250 gto (oh man that would be awesome!!!!!)

[Blacktiger]

I could go for a few myself.

81-84 Monte Carlo flat nose (the pre ss models)
70-81 Second Gen Camaro
69-72 Chevelle

Can ya tell I like Chevy? LOL

[microrcdude]

Originally Posted by twood

weinermobile in 1/10 scale

I second that.

[harley1874666]

i have the stuff to make my own bodies except for a heat source. i can carve a plug for the ups body but i haven't figured out how to heat the lexan in a uniform fashion.

[orbitron]

I heard an old oven will work. Basically make two frames and sandwich the lexan between them, then heat it up on one of the racks of the oven till it droops then let 'er rip in the vacuum form.

....I think.....

[harley1874666]

that's what i've heard also but i don't know how long the lexan stays pliable.

[tarheelquality]

I like the second gen Camaro, had a '78 and would love to have it in 1/10th, as for the different Z's ABD hobby makes most of them Horizon just wont import them and Horizon is their US importer. I have contacted both Horizon and ABC about this and the only response I get is try a Hong Kong online shop which I can only find in Chinese of course.....

I want a first gen RX 7 FB

[calvin3]

Some of these bodies are already out there.

Nissan 280z widebody - Tamiya had a 280ZX
Civic Hatchback - Tamiya and Frewer
Ford Cosworth - Tamiya RS Cosworth
69 vette stingray - Parma I think I use to have one
Porsche 935/78 - Tamiya - Good luck -$700 for a kit on ebay.
57 Chevy - Parma

[MT2 owns you]

well then...*porsche 930 turbo*
1968 dodge charger
1978 280z
audi rs4
ruf r turbo (just a fancy turbo)
porsche 993
ruf ctr2 (pretty sure its just a fancy 993)
school bus
bat mobile
the flintstone car
bmw e30 m3 (the newest one-like 1990 or so)
dump truck
TAXI!!
armored truck
ferrari f430
aston martin db-anything
aston martin vanquish
a large rat
roadkill
delorean
model T
mini cooper
mystery machine

and i third the weinermobile an UPS truck...yea...ALL delivery trucks....and U-Haul...yea....any business truck/car/van